Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Disable your ad blocker to continue using our website.
Sending issues with my uniden/4 ft firestik combo
This is the place to post your general tips or ask questions about your installation, whether it's for mobile or base stations.
Post Reply
16 posts
• Page 1 of 1
- JAXjeremy
- Mud-Duck Sr.
- Posts: 7
- Joined: September 24th, 2015, 9:51 am
- Real Name: Jeremy Millrood
Sending issues with my uniden/4 ft firestik combo
Hi everyone. I've got a small uniden CB in my rig connected to a 4 ft firestik antenna by way of a some high quality coax. The CB is direct wired to the battery and I tuned the antenna with my SWR meter and it's set correctly. Anyway, the CB receives just fine, but when I transmit I've got problems and folks I'm trail riding with can barely hear me.
I've checked the basics, antenna ground, kinks in the coax, but can find anything that stands out. The unit is relatively new, but maybe there's a problem with the mic. Unable to post pics to show my setup, so before I toss it and get something else, wanted to check with you guys to see if I'm overlooking anything. Thanks.
I've checked the basics, antenna ground, kinks in the coax, but can find anything that stands out. The unit is relatively new, but maybe there's a problem with the mic. Unable to post pics to show my setup, so before I toss it and get something else, wanted to check with you guys to see if I'm overlooking anything. Thanks.
-
- 2 PILL USER
- Posts: 14
- Joined: January 14th, 2018, 2:53 pm
- Handle: Gunner
- Real Name: Larry
- Radio: 2970n2 Yaesu 891
- Contact:
- MDYoungblood
- Site Admin
- Posts: 10774
- Joined: June 12th, 2010, 8:05 pm
- Handle: MDYoungblood
- Real Name: Gregory
- Antenna: HyGain AV-6160
- Radio: Icom IC-746 (non pro)
- Contact:
Re: Sending issues with my uniden/4 ft firestik combo
Post by MDYoungblood »
I'm guessing but this is the setup your running; http://www.cbradiotalk.com/vi ... =6&t=47449 , glad to hear you got the SWR problem figured out. The problem could be the mic or just the radio needs a little tweaking to make it modulate better. The little Uniden 520XL, sice there is no warranty on it now, open the speaker side and look for a diode marked D14, clip one side and lift it so it is not making contact, put the cover back on and try that. It should sound 100% better unless like you said there is a problem with the microphone.
3's
Greg
3's
Greg
- JAXjeremy
- Mud-Duck Sr.
- Posts: 7
- Joined: September 24th, 2015, 9:51 am
- Real Name: Jeremy Millrood
- JAXjeremy
- Mud-Duck Sr.
- Posts: 7
- Joined: September 24th, 2015, 9:51 am
- Real Name: Jeremy Millrood
Re: Sending issues with my uniden/4 ft firestik combo
MDYoungblood wrote: ↑February 15th, 2018, 2:55 pm I'm guessing but this is the setup your running; , glad to hear you got the SWR problem figured out. The problem could be the mic or just the radio needs a little tweaking to make it modulate better. The little Uniden 520XL, sice there is no warranty on it now, open the speaker side and look for a diode marked D14, clip one side and lift it so it is not making contact, put the cover back on and try that. It should sound 100% better unless like you said there is a problem with the microphone.
3's
Greg
That's my setup..thought I had posted here a while back, yeah the SWR was good at the time. So you're suggesting clipping this D14 diode?? I can definitely give that a shot. Can't imagine it's the mic, but I guess anything is possible.
- Bobcat
- Donor
- Posts: 232
- Joined: January 17th, 2007, 9:02 am
- Handle: Bobcat
- Real Name: Bob
- Call Sign: AI5RR
- Radio: SBE Console V ; Sears Roadtalker 40 SSB
- Contact:
Re: Sending issues with my uniden/4 ft firestik combo
This may sound weird....but I am just trying to "cover the base".
When you key and they can't hear you.... ask them to take a look at their S meter next time and see what the needle does when you key.
I have had people in close proximity to my antenna before and, when the keyed up, the needle took a jump WAY high on the scale. I think that, what was happening was that they were hitting MY receiver so hard they were overloading my front end..... sort of like compressing it.... squashing all the modulation out because it was driving the incoming signal to the rails.... so when it demodulates.. you don't get much apparent audio.
It's just a thought.....
When you key and they can't hear you.... ask them to take a look at their S meter next time and see what the needle does when you key.
I have had people in close proximity to my antenna before and, when the keyed up, the needle took a jump WAY high on the scale. I think that, what was happening was that they were hitting MY receiver so hard they were overloading my front end..... sort of like compressing it.... squashing all the modulation out because it was driving the incoming signal to the rails.... so when it demodulates.. you don't get much apparent audio.
It's just a thought.....
- JAXjeremy
- Mud-Duck Sr.
- Posts: 7
- Joined: September 24th, 2015, 9:51 am
- Real Name: Jeremy Millrood
Re: Sending issues with my uniden/4 ft firestik combo
Thanks for the suggestion Bobcat, I can tell you when we tested it we were pretty close together. Again, I could hear him fine, but my was not coming through very good on his side..don't recall what sort of CB he had..I've got a neighbor that has a Cobra 29 we can test with.
- MDYoungblood
- Site Admin
- Posts: 10774
- Joined: June 12th, 2010, 8:05 pm
- Handle: MDYoungblood
- Real Name: Gregory
- Antenna: HyGain AV-6160
- Radio: Icom IC-746 (non pro)
- Contact:
Re: Sending issues with my uniden/4 ft firestik combo
Post by MDYoungblood »
I agree that it is possible for your radio to overload the receive of another, since your neighbor has a Cobra radio, once to check that it is not that ask to borrow his microphone and try, the wiring (4pin) is the same on both radios.
3's
Greg
3's
Greg
- jessejamesdallas
- Donor
- Posts: 6287
- Joined: October 10th, 2004, 7:02 pm
- Handle: Jesse James Dallas
- Real Name: Jesse
- Radio: working
- Contact:
Re: Sending issues with my uniden/4 ft firestik combo
Post by jessejamesdallas »
Could just be a damaged Mic...Seeing how this is on a off road vehicle that doesn't get used much...moisture from just changing weather could have damaged it...
IF SWR checks out OK, try a different Mic. If this is the uniden 520xl, any Cobra 4-pin Mic will work with it...I have a 520 also, and personally I think those little factory Mic's that come with that radio are POS to start with.
IF SWR checks out OK, try a different Mic. If this is the uniden 520xl, any Cobra 4-pin Mic will work with it...I have a 520 also, and personally I think those little factory Mic's that come with that radio are POS to start with.
Do not argue with an idiot. He will drag you down to his level and beat you with experience.
- battyice
- 6 PILL USER
- Posts: 69
- Joined: April 17th, 2017, 3:45 am
- Handle: Robert
- Real Name: Robert
- Antenna: Tram 1498
- Radio: Uniden 980SSB
- Contact:
Re: Sending issues with my uniden/4 ft firestik combo
Are you still using the stock Uniden mic?
There is something different about the factory mics on those little Uniden's. I tried a known-good mic off a Cobra on a Uniden 520Xl and everyone said they could barely hear me. I switched back to the factory mic and everyone said I sounded great.
There is something different about the factory mics on those little Uniden's. I tried a known-good mic off a Cobra on a Uniden 520Xl and everyone said they could barely hear me. I switched back to the factory mic and everyone said I sounded great.
Station 731, Northern NY
-Robert
-Robert
- JAXjeremy
- Mud-Duck Sr.
- Posts: 7
- Joined: September 24th, 2015, 9:51 am
- Real Name: Jeremy Millrood
Re: Sending issues with my uniden/4 ft firestik combo
I'm using the factory mic. This weekend, I went back and double-checked everything, antenna mount, ground, and coax connections, SWR. Turns out the problem was where the coax attaches to the radio. I noticed there was a lot of thread showing and realized the collar wasn't screwed the whole way down. Basically I had a bad connection to the antenna. Anyway, I tested with my neighbor and his Cobra 29 all is good.
- 443 Arizona
- Mod Duck
- Posts: 896
- Joined: April 29th, 2010, 2:22 pm
- Handle: Double R
- Real Name: Steve
- Radio: madison on 5/8 wave
- Contact:
Re: Sending issues with my uniden/4 ft firestik combo
Post by 443 Arizona »
i knew i could fix it,,haha
- Bobcat
- Donor
- Posts: 232
- Joined: January 17th, 2007, 9:02 am
- Handle: Bobcat
- Real Name: Bob
- Call Sign: AI5RR
- Radio: SBE Console V ; Sears Roadtalker 40 SSB
- Contact:
-
- NEW DUCK
- Posts: 2
- Joined: February 5th, 2019, 11:49 am
- Handle: mountain lion
- Real Name: Magno Campos
- Call Sign: px2d0831
- Antenna: Cubic Quad
- Radio: superstar 3900
- Contact:
-
- Mud-Duck Sr.
- Posts: 7
- Joined: April 17th, 2018, 6:56 am
- Handle: Msppiguy
- Real Name: Eric Grantham
- Radio: none yet
- Contact:
Re: Sending issues with my uniden/4 ft firestik combo
I am new here. So what does clipping that diode do ? ThanksMDYoungblood wrote: ↑February 15th, 2018, 2:55 pm I'm guessing but this is the setup your running; http://www.cbradiotalk.com/vi ... =6&t=47449 , glad to hear you got the SWR problem figured out. The problem could be the mic or just the radio needs a little tweaking to make it modulate better. The little Uniden 520XL, sice there is no warranty on it now, open the speaker side and look for a diode marked D14, clip one side and lift it so it is not making contact, put the cover back on and try that. It should sound 100% better unless like you said there is a problem with the microphone.
3's
Greg
- MDYoungblood
- Site Admin
- Posts: 10774
- Joined: June 12th, 2010, 8:05 pm
- Handle: MDYoungblood
- Real Name: Gregory
- Antenna: HyGain AV-6160
- Radio: Icom IC-746 (non pro)
- Contact:
Re: Sending issues with my uniden/4 ft firestik combo
Post by MDYoungblood »
Clipping the diode will disable the AMC (Automatic Modulation Control) in the radio. Using a stock mic it will sound a lot better, if a power mic is used adjust the gain so it doesn't over modulate.
3's
Greg
3's
Greg
Post Reply
16 posts
• Page 1 of 1
Return to “Mobile 🚗 / 🏠 Base Install Help”
Jump to
- Welcome and Community
- Skip Shooter's Paradise
- ↳ General Discussions
- ↳ Watergates & Videogates
- ↳ Shooting Skip
- ↳ Hall Of Fame
- ↳ Journal
- Radio Help
- ↳ Intro To Radios 101
- ↳ General Questions
- ↳ Base Setups
- ↳ Mobile 🚗 / 🏠 Base Install Help
- ↳ Competition Rigs
- ↳ Amplifiers / Power Supplies
- ↳ Charging System
- ↳ Mobile Setups
- ↳ Antenna Help
- ↳ Microphone Info
- ↳ Radio Modifications
- ↳ Shortwave Radios / Scanners
- ↳ Sideband (SSB)
- ↳ Tube Radio Equipment
- ↳ Other Technical Questions
- ↳ Miscellaneous Radio
- Buy / Sell / Trade
- ↳ For Sale Area Rules
- ↳ For Sale Area
- ↳ eBay Shopping
- ↳ Amazon Shopping
- ↳ Trade Equipment
- ↳ Wanted Radio Equipment
- ↳ Positive Feedback
- Off Topic
- ↳ Miscellaneous Chat
- ↳ Computer Help
- ↳ Signature Test Area
- The White House
- ↳ Ask Marv
- Federal Communications Commision (FCC)
- ↳ F.C.C. Rules And Regulations
- Home
- All times are UTC-06:00
- Cookie-Settings
- Delete cookies
- About us
- Downloads
- Contact us
Maxthon style by Culprit. Updated for phpBB3.3 by Ian Bradley
Powered by phpBB® Forum Software © phpBB Limited
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.