Just use all the mesurments (radial lengths and hub spacing) for the PDL-2. I know you can get all the assembly info off the net. What do ya think??? Yeah I know...NUTS 
PDL 2 from a MR-4
-
385
- Donor
- Posts: 382
- Joined: December 26th, 2008, 5:53 pm
- Handle: Step~Child
- Real Name: Tracy
- Antenna: imax 2000
- Radio: Almost too many
- Contact:
PDL 2 from a MR-4
Call me crazy but i have a moonraker 4 that needs some parts and was curious if you could build a PDL-2 type beam out of the MR-4 and not have to have the orbital thingy in the middle??? Or basicly a MR-2 Just use all the mesurments (radial lengths and hub spacing) for the PDL-2. I know you can get all the assembly info off the net. What do ya think??? Yeah I know...NUTS
Just use all the mesurments (radial lengths and hub spacing) for the PDL-2. I know you can get all the assembly info off the net. What do ya think??? Yeah I know...NUTS 385, Tracy
-
PONY EXPRESS
- Wordwide & Qualified
- Posts: 986
- Joined: August 9th, 2007, 9:04 pm
- Radio: GOLDEN EAGLE Mark IV
- Contact:
It would be just like some of these maco beams out there with the quad reflector....YES is the answer you can
Its not a real radio unless it has tubes and USB/LSB on the front panel ....
-
lonesome 500
- Donor
- Posts: 1,779
- Joined: June 8th, 2007, 3:40 pm
but the question is why....loose the amount of forward gain
just go to maco...set it up just like a shooting star...maco gammas and all
just go to maco...set it up just like a shooting star...maco gammas and all
<center>
<a><img></a>
</center>
<a><img></a>
</center>
